Indoor Series — LED Grille Transparent Display

Common Specifications： Pixel density ：73728 pixels/㎡| 32768 pixels/㎡| 16384 pixels/㎡| 18432 pixels/㎡| 9216 pixels/㎡；LED package：2121；Module size：125mm*500mm；Cabinet material：Aluminium extrusion；IP rating：IP30；Input voltage：AC 200–240 V, 50/60 Hz；Viewing angle ：160° | 140°；Lifetime：≥ 100,000 hours；Grayscale：16-bit；Average power：400 W/m² Product Features： 1、High transparency — sightlines and daylight remain unobstructed. Standard indoor variants deliver 65%–90% light transmittance, while the premium film-type crystal transparent variant reaches up to 95%; when the screen is off it is almost invisible. Installed on glass storefronts and glass partitions, the screen lets natural light pass through freely, avoiding any darkening of the interior space. 2、Slim, lightweight body — low installation and retrofit cost. Very light: modules typically weigh only 3–5 kg/m², far less than conventional die-cast aluminium LED walls, so no heavy steel structure is required and the load on the glass and walls is greatly reduced. Multiple installation methods are supported: adhesive-back, magnetic, suspension and clip-lock; film-type transparent screens can be applied directly to the inside face of the glass with virtually no change to the original decor or glass structure, keeping construction time short. Custom shapes are supported: curved, cylindrical, corner, wave and other non-standard forms for showcases, round columns and curved-glass windows. 3、Easy maintenance and flexible zoned use. The modular LED-strip structure means that if a single strip fails, only that strip module needs to be replaced — no need to remove the entire screen. Film-type screens can even be peeled off, cleaned and re-installed. Independent zone-lighting control allows different zones to play different content simultaneously. Front maintenance from inside the glass is fully supported, so no rear service space needs to be reserved. 4、Strong space adaptability — preserves the original interior style. Traditional indoor full-colour walls occupy wall surfaces conspicuously; a transparent screen instead attaches to glass, railings or partitions, blending with the existing decor and preserving the minimal look of shopfronts and lobbies. It can be installed in many locations where standard large screens simply cannot be deployed: escalator side panels, glass railings, ceiling glass, showcase glass, floor-to-ceiling glass doors, meeting-room glass partitions and more.